Calgary Concrete Cutting & Coring
Renovations across Calgary often require new elevator shafts, stair openings, or mechanical penetrations in existing slabs and walls. Makki Abatement plans each cut with structural engineers, utility locators, and building operators to maintain safety while delivering exact dimensions. Our crews use wall saws, slab saws, and hand-held units to reach basements, rooftops, and tight equipment rooms without compromising fire separations or tenant comfort.
Book A Free Consultation
24/7 Specialized Solutions
Precision Concrete Cutting and Coring
In the diverse architectural landscape of Southern Alberta—from the high-rise mechanical rooms of Downtown Calgary to the mountain-side foundations of Canmore—the requirement for modifying existing concrete structures demands absolute precision. Concrete cutting and coring are specialized technical services that allow for the controlled modification of slabs, walls, and footings without compromising the structural integrity of the surrounding environment. Makki Abatement provides expert, dust-controlled cutting and coring services across Calgary, Okotoks, Chestermere, Cochrane, Airdrie, Canmore, and all surrounding regions.
It is essential to understand the distinction between our specialized services and traditional demolition. While our sister website, Makki Demolition, is the regional leader in total structural demolition, site clearing, and mass excavation using heavy machinery, Makki Abatement focuses on the "surgical" and "indoor" aspects of the industry. We provide the high-precision selective demolition and modification services needed for tenant improvements, utility repairs, and hazardous site remediation. Our equipment is specialized for indoor use—utilizing electric-powered, emission-free saws and HEPA-shrouded vacuum systems—ensuring that we complement the larger-scale work of our structural demolition division.
Professional Concrete Coring: Vertical and Horizontal Precision
Concrete coring is the process of drilling perfectly circular holes through reinforced concrete, masonry, or stone. This is a critical requirement for installing mechanical, electrical, and plumbing (MEP) systems in both new and existing buildings.
At Makki Abatement, we utilize diamond-bit coring technology that allows us to penetrate the hardest substrates, including heavily reinforced slabs and grade beams. Our coring services are essential for:
- Plumbing and HVAC Installations: Creating pathways for floor drains, vent stacks, and furnace venting in Airdrie and Chestermere residential basements.
- Electrical Conduit Pathways: Precision drilling for subterranean wiring in commercial facilities in Calgary.
- Structural Anchoring: Preparing footings for the installation of screw piles or structural underpinning.
- Testing and Analysis: Extracting concrete core samples for engineering assessments and strength testing in the Bow Valley.
Specialized Concrete Cutting: Dustless and Emission-Free
Standard concrete cutting creates two major hazards: carbon monoxide from gas engines and carcinogenic silica dust. Makki Abatement has eliminated these risks by investing in a fleet of high-performance electric diamond saws. This allows us to perform precision indoor concrete cutting in confined spaces—such as Cochrane retail units or Okotoks medical clinics—without the need for massive ventilation systems.
Our cutting services include:
- Slab Sawing: Creating clean, vertical cuts in floor slabs for utility trenching or the removal of contaminated sections.
- Wall Sawing: Cutting precise openings for new doors or windows in existing concrete foundations.
- Expansion Joint Cutting: Controlling cracks in new concrete pours for large-scale commercial floors.
- Hand Sawing: Ideal for tight spaces where larger machinery cannot maneuver.
The Safety Standard: Silica Dust Suppression and HEPA Filtration
Crystalline silica is a known human carcinogen. When concrete is cut or cored, it releases microscopic dust that can remain airborne for hours, endangering everyone in the building. As an abatement company, safety is our primary focus.
We utilize a "capture-at-source" philosophy for all concrete cutting and coring projects:
- Water-Suppression Systems: Utilizing wet-cutting techniques to turn potential dust into a manageable slurry.
- Vacuum-Shrouded Tooling: Our saws and drills are equipped with shrouds that connect directly to industrial-grade HEPA vacuums.
- Containment Zones: If necessary, we establish polyethylene barriers and negative air pressure, similar to our mould abatement protocols, ensuring zero dust migration to other parts of the building.
Contextual Integration: Abatement and Utility Access
One of the unique advantages of hiring Makki Abatement for your cutting and coring needs is our expertise in hazardous materials. Often, a utility failure requires cutting through concrete that sits directly above asbestos-cement (Transite) piping.
A general concrete cutter may accidentally disturb the asbestos, leading to a massive environmental hazard and project shutdown. Because we are certified asbestos abatement contractors, we treat every slab as a potential hazard. We provide safe concrete removal for asbestos pipe access, performing the coring or cutting with the necessary environmental precautions already in place.
Serving Calgary, the Bow Valley, and Southern Alberta 24/7
Concrete emergencies, such as burst plumbing lines beneath a slab, do not happen on a schedule. Makki Abatement provides 24-hour emergency response for concrete cutting and coring across our entire service area:
- Calgary (All Quadrants): Serving the metropolitan core with rapid-response interior cutting.
- Airdrie & Cochrane: Focused on the commercial and residential growth in these northern and western hubs.
- Canmore & Banff: Providing vibration-free and dustless services for mountain resorts and eco-sensitive properties.
- Okotoks & Chestermere: Supporting residential upgrades and utility repairs in these southern and eastern communities.
Why Partner with the Makki Group for Concrete Services?
Choosing Makki Abatement for your precision cutting and coring ensures a seamless workflow. If your project begins as a precision utility repair but discovers a need for full-scale building demolition, our relationship with Makki Demolition ensures that you have the right equipment for every phase of the project. We offer:
- Surgical Precision: We cut only what is necessary, reducing patch-back costs.
- Environmentally Conscious: Zero emissions and 99.9% dust capture.
- Expert Crossover: Certified in asbestos testing and remediation to handle hidden hazards.
- 24/7 Availability: We are ready to mobilize at a moment's notice for any emergency.
Frequently Asked Questions
How deep can you core drill through concrete?
With our professional diamond-bit equipment and extensions, we can core through several feet of reinforced concrete, making us the ideal choice for foundation modifications in Canmore and Calgary.
Is concrete cutting messy?
When performed by Makki Abatement, the mess is minimal. We use wet-shrouded vacuums to capture slurry and dust, ensuring your indoor environment remains clean and safe for re-occupancy immediately after the work is done.
Can you core drill through rebar?
Yes. Our diamond-impregnated core bits are specifically designed to cut through hardened steel reinforcement (rebar) and high-PSI concrete without damaging the surrounding structure.
Precision concrete cutting
Plan your Calgary cutting or coring project
Call to coordinate site scans, cutting schedules, and cleanup so your renovation keeps momentum.
24/7 emergency response across Calgary and surrounding communities.